Description
The Aluminium profile rubber scraper brush is the ultimate cleaning system for uncovered outdoor areas with heavy weather exposure. The effective combination of non-slip rubber profiles and hard scraper brushes on the Aluminium profile rubber scraper brush removes stubborn coarse dirt, slush and snow from deep shoe profiles with ease. The extremely torsion-free aluminium frame system effortlessly withstands moisture, frost and high mechanical loads. Manufactured centimeter-accurate to your specific dimensions, this doormat offers a safe, durable and extremely resilient solution for a permanently clean entrance. Available in the color Black.
Ideal in an installation frame in front of the entrance. The doormat custom-fit for large and small areas.
In the height of 22 mm with a ramp frame made of stainless steel 18/10 – hand-welded & ground.
For larger dimensions, we produce the ramp frame from aluminum and ship it in individual parts.
Ask our customer service: +43 699 100 88 504
We automatically personalize our doormats with: “fussmatte.at” – if you do not wish this, please activate the option: “without branding”.
Cleaning instructions can be found in this VIDEO
How to measure correctly: Installation Frame
You already have an installation frame and need a matching doormat
- Measure the inner clear width of the installation frame and deduct approx. 5 mm from each side (e.g., clear width: 795 x 495 mm = doormat: 790 x 490 mm).
- This small clearance is important so that the doormat can be rolled up easily.
You need a new doormat and an installation frame
- Measure the frame outer dimensions and use these measurements to order a doormat with an installation frame.
- We will automatically manufacture the doormat in the correct size.
Video guide
Installation Frame
An installation frame is installed flush with the floor, ensuring that the doormat inside sits at the exact same height as the floor surface.
If you order both an installation frame and a doormat, please provide us with the frame outer dimensions – we will automatically manufacture the doormat in the correct size.
Please note that the thickness of the installation frame is 3 mm, and an additional frame connector of approx. 2 mm is used. This means that the installation height is approx. 5 mm higher than the mat height.
A height difference of ± 2 mm is permissible. For larger deviations, we can offer you leveling mats made of rubber granulate with a height of 3 or 5 mm.
Leveling mat
Installation Frame Express Service
Upon request, we can deliver the installation frame in advance within 3 business days. The installation frame will be welded up to a size of approx. 1 x 1.7 m. The frame thickness is then 3 mm (without frame connectors). Larger installation frames can warp during transport, which is why we deliver them in parts with frame connectors. If you have any questions, please contact our customer service.
Ramp Frame
A ramp frame is surface-mounted (not recessed); it lies on top of the finished floor to prevent tripping hazards.
Ramp frame height: 21 mm
Our ramp frames are made of stainless steel, welded by hand, ground, and brushed.
Reviews
There are no reviews yet.